In WiFi network interface, you can alter the WiFi password or switch to anther WiFi network. In older version of Anyscene or Bebelens app, the password is sightless, please update your Anyscene app or Babelens app to latest version.
1. Go to WiFi networks interface
Open your Anyscene or Babelens app, and go to “My Camera” –> “Edit Camera” –> “Advanced Setting” –> “WiFi Networks”. For more details about how to access advanced setting page, see this article.
2. Configure WiFi networks
- The camera will automatically search for available Wi-Fi networks.
- Select WiFi network which is same as your smart phone in Step 2.
- Please NOTE: The percentage on the right side of WiFi network’s name is meaning the signal strength of this WiFi network. If the percentage of signal is weak, please keep the camera closer to router/modem. Or re-check the antenna connection.
- The color of percentage means the signal strength whether or not is strong enough to work normally. The grey color means the signal is too weak that the camera can not work with this WiFi network.
- Type the WiFi password to the field of “Setup WiFi” popup window. And then please tap “OK” button.
- If you type a wrong password, there will be
icon on the right side of WiFi network. That means your password is incorrect. Please tap the WiFi network again to recheck it.
If you type a correct password, there will be
icon on the right side of WiFi network. Thar means the WiFi password is correct. Please tap the “Back” button to turn back “My Camera” interface.
